PWRs Operation and Maintenance Raw Water Systems (LCC19)

Raw water has a major safety role as acting as cold source for plants. Raw water is used for:

  • Cooling the condenser, either in open or in closed circuits;
  • Providing water for service water systems;
  • Providing water to the Fire Fighting System;
  • Providing water to the Auxiliary Feedwater Tank in case of emergency (earlier units).

The report covers the following topics: design consideration, raw water chemical treatments, operating experience along with the maintenance programmes of raw water systems.

DOWNLOAD SAMPLE

The condenser: a key player for a good feedwater chemistry

This report compiles the degradations observed in condensers, either on steam side or raw water side. The oldest condensers were known before the nuclear era, the newest came to the light with the development of nuclear reactors. However, more attention was brought to nuclear plant condensers since while operating with a few leaks was allowed in fossil fired plants, this was strictly forbidden in pressurized water reactors, mainly because of the steam generators susceptibility to pollution.

DOWNLOAD SAMPLE  

Key Emerging Issues and Recent Progress Related to Structural Materials Degradation

(LCC14 AR)

During operation, the materials used for the construction of components react with light water reactor environment and cause component degradation, including cracking at welds and piping. Such degradation is due to irradiation, corrosion, fatigue, and other damage mechanisms, and has remained a severe operational challenge for utilities. Details on such degradation are regularly reported and published in scientific journals and at utility workshops and conferences. Foremost in the latter category are those organised since 1983 by NACE, TMS, ANS and CNS in the Environmental Degradation of Water Reactor Materials.
The Annual Report will contain highlights from the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems Water Reactors, which was held in Portland, Oregon in August 2017. It will cover PWRs, VVERs, CANDUs and BWRs.

DOWNLOAD SAMPLE  | DOWNLOAD PRODUCT SHEET

EPRI LWRs Material Reliability 2016 Conference

(LCC13 AR)

For many years, EPRI has organised conferences on light water reactors materials reliability. Given there was neither Environmental Degradation nor Fontevraud conferences in 2016, EPRI took the opportunity of providing this conference in 2016. During days 2 to 4, 104 slides were presented in 3 parallel sessions, which covered 18 topics on a whole range of concerns of LWRs.

This ANT report is a summary of some of the most important slides, with little text added. The report contains a summary and a chapter dedicated to the relevance of some results presented for the Industry. This conference brings up-to-date information regarding the latest research, plant experiences, analyses, planning and solutions for increased materials reliability in BWR and PWR components. The report is of interest for engineers in charge of expertise, materials, chemistry, non-destructive testing, fracture mechanics, corrosion, irradiation effects, degradation mitigation, and modelling.

DOWNLOAD SAMPLE  | DOWNLOAD PRODUCT SHEET

Key Emerging Issues and Recent Progress related to Structural Materials Degradation (PWRs, VVERs, CANDUs and BWRs)

(LCC12)

During operation, the materials used for the construction of components react with light water reactor environment and cause component degradation, including cracking at welds and piping. Such degradation is due to irradiation, corrosion, fatigue, and other damage mechanisms, and has remained a severe opera­tional challenge for utilities. Details on such degradation are reg­ularly reported and published in scientific journals and at utility workshops and conferences. Foremost in the latter category are those organized since 1983 by NACE, TMS, ANS and CNS in the Environmental Degradation of Water Reactor Materials.

This Report contain highlights from the 17th Inter­national Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, which was held in Ottawa, Canada in August 2015. It covers PWRs, VVERs, CANDUs and BWRs. Over 150 papers were published at this conference and this Report cover diverse topics touching on specific degradation modes in various alloys, such as:

  • PWSCC of cold worked Alloy 690 and its weld metals
  • Corrosion fatigue of stainless steels in PWRs and BWRs
  • Fuel cladding materials
  • Cracking of Alloy 718 and X750
  • Flow assisted corrosion
  • Oxide films and characterisation in PWR Secondary systems
  • SCC of Alloy 82 and 182 welds
  • IASCC of stainless steels
  • Irradiation studies involving ion and neutron irradiation
  • Synergistic effects of thermal ageing and neutron embrittlement
  • Alloy 600 oxidation and mechanisms in PWRs
  • PWR Field experience
  • Advances in in-situ monitoring and ex-plant and mockup component evaluation
  • Generation IV materials research
  • Fundamental studies involving new state-of-the-art microscopy and other techniques
  • Fukushima accident related research on SS corrosion in sea water
  • Dry Cask Storage System and Waste Container Corrosion

DOWNLOAD SAMPLE  | DOWNLOAD PRODUCT SHEET

Environmentally-Assisted Degradation of Structural Materials in Water Cooled Nuclear Reactors – An Introduction

(SMDR)
This Report is an updated and expanded version of the 2006 ANT International Report entitled: “Environmentally-assisted degradation of structural materials in water cooled nuclear reactors” authored by Dr. Peter Ford.

The objective of this Report are twofold: first, to provide an updated edition of the 2006 Report cited above and, second, to provide a text-book that complement the 4-day webinar on environmentally-assisted degradation of structural materials.

The Report is intended for people new to the subject, or who need a “refresher” on the essential factors behind component failures and the subsequent mitigation actions. Such a focus is critical at this time, given the ongoing retirement of experienced personnel and the loss of “corporate memory” relating to the management of materials degradation. This loss is being felt in areas of reactor license renewal, power uprates, load following, and the certification and construction of advanced designs of both BWRs and PWRs.

In the same series as this updated and expanded Report, there are four other detailed Reports that analyse the behaviour of structural material degradation of various alloys commonly used in Pressurised Water Reactors (PWR/VVER) and Boiling Water Reactors (BWR).

DOWNLOAD SAMPLE  | DOWNLOAD PRODUCT SHEET

Key Emerging Issues and Recent Progress Relating to Structural Materials Degradation

(LCC10 AR)
This Report discusses the PWR/VVER highlights from the latest of these conferences, namely the 16th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, that was held in Ashville, NC in August 2013. The corresponding BWR highlights were presented in one of the LCC9 Reports last year. Over 150 papers were published at this conference and covered diverse topics touching on specific degradation modes in various alloys. Additionally, journal articles appearing on the same subjects in the technical literature in the last two years are also reviewed.

DOWNLOAD SAMPLE  | DOWNLOAD PRODUCT SHEET