Material Test Reactors and other Irradiation Facilities

(ZIRAT23/IZNA18)

In materials test reactors (MTRs), materials are subject to intense neutron irradiation to study the induced changes. As MTRs are able to reproduce material degradation undergone by materials in power reactors, they provide essential support to the study of ageing of materials in power reactors. MTRs are also being used to irradiate new cladding materials and fuels that are being developed as Accident Tolerant Fuel (ATF) systems.

DOWNLOAD SAMPLE  | DOWNLOAD PRODUCT SHEET

Performance Evaluation of New Advanced Zr Alloys for BWRs and PWRs/VVERs Vol. I

(ZIRAT22/IZNA17)

To meet the current situation with more aggressive reactor environments (higher burnups, changing water chemistries and loading patterns), and resolving fuel performance issues such as BWR channel bowing and PWR assembly bowing, a large number of zirconium alloys have been and are being developed. The main driver for the initial material development in Pressurised Water Reactors (PWRs) has been to reduce corrosion rates and Hydrogen Pick-Up Fractions (HPUFs), which have occasionally limited the maximum discharged burnup.

DOWNLOAD SAMPLE  | DOWNLOAD PRODUCT SHEET

Performance Evaluation of New Advanced Zr Alloys for BWRs and PWRs/VVERs Vol. II

(ZIRAT22/IZNA17)

To meet the current situation with more aggressive reactor environments (higher burnups, changing water chemistries and loading patterns), and resolving fuel performance issues such as BWR channel bowing and PWR assembly bowing, a large number of zirconium alloys have been and are being developed. The main driver for the initial material development in Pressurised Water Reactors (PWRs) has been to reduce corrosion rates and Hydrogen Pick-Up Fractions (HPUFs), which have occasionally limited the maximum discharged burnup.

DOWNLOAD SAMPLE  | DOWNLOAD PRODUCT SHEET

Hot Cell Post-Irradiation Examinations Volume II

(ZIRAT21/IZNA16)

Maintaining and improving reliability of fuel and structural components requires an understanding of their behaviour in reactor and the mechanisms that have been observed to cause failures. A key factor in improving reliability is the identification of the cause or causes of failure. Such information, in turn, requires the examination and analysis of irradiated fuel (including bundle hardware) and structural components at reactor sites (poolside examinations), in hot cells and in related laboratories. Thus, to make progress toward ultra-high reliability fuel and to reduce the potential for fuel failure, it is imperative to examine both failed and non-failed (reference) fuel.

Post-irradiation examinations (PIE) provide fuel vendors and nuclear utilities with data on how newly developed or established materials withstand normal operating conditions in new environments. Post-irradiation examinations are largely carried out at a Hot Cell Laboratory where irradiated fuel rods and other hardware can be received, handled, examined, and tested. The investigation results provide information for fuel and component improvement and, thereby, can potentially enhance operating efficiency and reliability.

  • Section 1 provide an overview about the status of post-irradiation examination (PIE) and inspection techniques for nuclear fuel and other zirconium alloy components used in CANDU reactors and their applications for analysis of materials behaviour in a CANDU reactor core.
  • Section 2 discusses these techniques along with real world examples of in-reactor microstructural changes and impact on material behaviour.
  • Section 3 provides information on PIE capabilities of some of the major hot cell facilities. This information will be useful for utility engineers when they need to have PIE performed on failed nuclear fuel or other components.

DOWNLOAD SAMPLE  | DOWNLOAD PRODUCT SHEET

Hot Cell Post-Irradiation Examination Techniques for Light Water Reactor Fuels

(ZIRAT19/IZNA14 STR)
Hot Cell Post-Irradiation Examination Techniques for Light Water Reactor Fuels The growing operational demands on nuclear fuel, such as longer fuel cycles, higher burnups, and use of transient regimes, call for more robust fuel designs and more radiation resistant materials. Implementation of new materials and fuel designs that are able to meet these more challenging conditions requires adequate operational feedback and practical verification of models for prediction of fuel behavior. Post-irradiation examinations (PIE) provide fuel vendors and nuclear utilities with data on how newly developed or established materials withstand normal operating conditions in new environments. Post-irradiation examinations are largely carried out at a Hot Cell Laboratory where irradiated fuel rods and other bundle hardware can be received, handled, examined, and tested. The investigation results provide information for fuel improvement and, thereby, can potentially enhance operating efficiency and reliability. The objectives of the hot cell examination of failed and sound sibling rods are to; characterize the fuel rod conditions associated with failure, identify the fuel failure mechanism, and provide insight into the root cause of the failures. The objectives of the hot cell examination of the fuel bundle hardware vary with the component being examined. The hot cell examinations/testing include a number of tasks selected to address these objectives using available hot cell capabilities. This Special Topic Report provides an overview about the status of post-irradiation examination (PIE) and inspection techniques for nuclear fuel and their applications for analysis of material degradation during fuel operation in a reactor core. Emphasis is given to advanced non-destructive and destructive PIE techniques applied to LWR fuel rods and bundle hardware. The objective of this STR is to provide this knowledge.

DOWNLOAD SAMPLE  | DOWNLOAD PRODUCT SHEET

Dry Storage Handbook

This handbook contain a technical assessment of the expected performance of spent nuclear fuel (SNF) during extended dry-storage time periods and the condition of such fuel at the end of dry storage.

The principal focus of the reviews is on SNF and the effects of dry storage rather than on dry-storage containers and the related storage facilities. The objective is to provide background information on the likely behavior of materials comprising water reactor fuel assemblies and on the performance of integral assemblies under conditions typical of dry storage for extended intervals of time.

In brief, the technical assessment supports a conclusion that, although technical issues have been postulated with regard to long-term storage, there are no high-risk concerns with the extension of dry storage to long times; with proper planning and implementation.

DOWNLOAD SAMPLE  | DOWNLOAD PRODUCT SHEET

Fuel Fabrication Process Handbook Rev 1 (FFPH)

The objective of the Fuel Fabrication Process Handbook is to provide guidance for a cost effective audit which uses audit time on areas which are most likely to affect the performance of the PWR/VVER and BWR fuel. The FFPH focuses on a “Process Audit” procedure, the audit of the fabrication process parameters for making high quality fuel. The FFPH provides the “what, why and how” to look at in an audit by:

  • Listing the generic fabrication process steps for all components and their assembly (what to look for).
  • Identifying important audit points and the attendant potential effect of deviations on performance (why to look).
  • Assess the fabrication and QC process control at critical points (how to look).

This Handbook is an updated and expanded version of the previous FFPH Handbook published in 2005. More than 35 organisations worldwide bought this Handbook. The expansion constitutes two sections on Statistical Quality Control and Software Quality Assurance. Statistical QC is a vital part of process control, the establishment of sampling plans and the qualification of inspection methods. The QA of software is important for auditing the software for the expanding automation of fabrication methods.

DOWNLOAD SAMPLE  | DOWNLOAD PRODUCT SHEET

Control Assembly Technology Report (FMTR Volume III)

The Report on Control Assembly Technology which constitutes Volume III of the series of Fuel Material Technology Reports (FMTRs) will be available during the Spring of 2014. It describes the designs, manufacturing, performance and issues related to BWR/PWR/VVER/CANDU Control Assemblies with Ag-In-Cd (AIC), B4C, Hf absorber materials and stainless steel structural materials.

DOWNLOAD SAMPLE  | DOWNLOAD PRODUCT SHEET

PWR Zr Alloy Cladding Water Side Corrosion (PZAC)

The Report discusses the different parameters impacting PWR fuel corrosion and provides a computer code which allows an equivalent comparison of new alloys irradiated in different reactors at different conditions. The computer code may also assist in identifying the mechanism why the corrosion rate starts to accelerate under certain conditions.

DOWNLOAD SAMPLE