STR on Interim Dry Storage of Commercial Spent Nuclear Fuel – An Update (ZIRAT28/IZNA 23)

Except for a few countries (Finland, Sweden, France, and possibly Canada), the timing for establishing a geologic repository has been shown to be unpredictable. Therefore, spent fuel storage will remain the last backend operation for the foreseeable future in many countries. With proper attention, the radiological impact of storage is very low, but regulatory agencies have placed a heavy burden on licensees because of concerns related to the highly negative public perception related to the presence of spent fuel storage facilities in our biological environment. Therefore, locations where spent nuclear fuel (SNF) is or will be stored and their chosen storage technologies are the subjects of much scrutiny.

The focus of this review is on the spent nuclear fuel rods, and not on the storage system components such as the casks or the canisters  and their internal hardware elements. More specifically, the following topics are treated in the report: 

  • Update of “Back-end” issues
  • Thermal creep behaviour in relation to hydride reorientation
  • PWR fuel rod cladding failure due to the hydrogen migration in spent fuel
  • Update on any work on storage, transportation, long term issues
  • Correlation between cooling rate and hydride reorientation. In particular, the case of fast cooling when the cask containing SNF is flooded with water, from a cladding temperature of ~350°C to ~30°C, is examined.

DOWNLOAD SAMPLE

Accident Tolerant Fuel: an update report 2020-2023 (ZIRAT28/IZNA 23)

During the last decade the development of various Accident Tolerant Fuel (ATF) concepts has come into focus of both research and industry communities in the USA, Europe and Asia. The accident tolerant fuel program is aiming towards improving the safety of nuclear energy by investigating materials that can replace or modify the current uranium-dioxide nuclear fuel and zirconium-based cladding. This research programs are being supported by all major nuclear countries since 2011.

This updated version of the previously issued ANT International 2021 ATF report will provide the reader with a useful, quick but comprehensive overview of the latest ATF technical developments. It will give relevant information about ATF cladding and fuel, appropriate warnings and useful insights to nuclear fuel engineers and designers as well as to the fuel buyers.

DOWNLOAD SAMPLE

Nuclear Fuel Behaviour Under RIA Conditions

(ZIRAT27/IZNA22)

The content of the Updated RIA is basically the same as the original report (Nuclear Fuel Behaviour under RIA conditions published within the ZIRAT21/IZNA Programmes), see information below. 

The main focus of this report is to give an update on two major subjects: (1) new RIA tests and the interpretation of the results and (2) new RIA related regulations. New RIA tests will complete the existing data base and their potential significance for RIA modelling or for RIA ruling. New acceptance criteria for RIA issued by US NRC are briefly described as well as some national approaches, different from the US NRC

DOWNLOAD SAMPLE

Pellet-Cladding Interaction (PCI and PCMI): progress in nuclear industry

(ZIRAT27/IZNA22)

Pellet-Cladding Interaction (PCI) and Pellet-Cladding Mechanical Interaction (PCMI) remains an important phenomenon in the modern nuclear reactor fuel engineering. This topic was addressed in detail in ZIRAT-11 Special topical report on PCI issued in 2006. Since then, a substantial development has taken place, such as introduction of new cladding materials and additive fuel pellets. In addition to this, flexible power operation is being considered by many utilities worldwide. This introduces new challenges to the safe and reliable operation of the nuclear fuel. The report discusses up-to-date developments in the above mentioned areas and summarizes the main outcomes of the R&D work performed since 2006.

DOWNLOAD SAMPLE

Corrosion and Hydrogen pickup (HPU) – Vol. III

Corrosion and Hydrogen pickup (HPU) mechanisms of Zr alloys remain a top priority of the nuclear industry. Commercial Zr alloys have today adequate in-reactor corrosion properties. However, hydrogen in fuel components limits the fuel performance today during normal operation and accident conditions as well as during transport of spent fuel. Despite more than 50 years research, the corrosion and HPU mechanisms are still not clear. Improved understanding of the in -reactor oxidation and hydrogen pickup mechanisms are thus required. To shed light on theses complicated mechanisms A.N.T. International has published a set of three reports (Vol. I, II and III) with the focus on explaining the very complicated corrosion and hydrogen pickup mechanisms in an understandable manner.

Volume III gives an introduction to the best understood mechanisms of Zr alloys corrosion and HPU mechanisms, with the aim of giving a ”mental image of the phenomena”, more than discussing in detail all the controversial aspects of the current scientific debates.

DOWNLOAD SAMPLE  

Corrosion and Hydrogen pickup (HPU) – Vol. II

Corrosion and Hydrogen pickup (HPU) mechanisms of Zr alloys remain a top priority of the nuclear industry. Commercial Zr alloys have today adequate in-reactor corrosion properties. However, hydrogen in fuel components limits the fuel performance today during normal operation and accident conditions as well as during transport of spent fuel. Despite more than 50 years research, the corrosion and HPU mechanisms are still not clear. Improved understanding of the in -reactor oxidation and hydrogen pickup mechanisms are thus required. To shed light on theses complicated mechanisms A.N.T. International has published a set of three reports (Vol. I, II and III) with the focus on explaining the very complicated corrosion and hydrogen pickup mechanisms in an understandable manner.

Volume II gives more detailed information on:

  • Early Zr alloy development
  • Out-of-reactor corrosion
  • General in Reactor Corrosion and Hydrogen Pickup behaviour
  • Effects of alloying impurities on corrosion and HPU
  • Corrosion modelling and prediction

DOWNLOAD SAMPLE  

Corrosion and Hydrogen pickup (HPU) – Vol. I

Corrosion and Hydrogen pickup (HPU) mechanisms of Zr alloys remain a top priority of the nuclear industry. Commercial Zr alloys have today adequate in-reactor corrosion properties. However, hydrogen in fuel components limits the fuel performance today during normal operation and accident conditions as well as during transport of spent fuel. Despite more than 50 years research, the corrosion and HPU mechanisms are still not clear. Improved understanding of the in -reactor oxidation and hydrogen pickup mechanisms are thus required. To shed light on theses complicated mechanisms A.N.T. International has published a set of three reports (Vol. I, II and III) with the focus on explaining the very complicated corrosion and hydrogen pickup mechanisms in an understandable manner.

Volume I gives an introduction on the corrosion and hydrogen pickup (HPU) processes in zirconium alloys. The following topics are treated in details:

  • The effects of in-reactor irradiation on both zirconium alloys and the coolant (radiolysis)
  • Crud sources, transport mechanisms and deposition mechanisms
  • Axial offset anomalies
  • Reactor cases of severe crud impact on fuel performance

DOWNLOAD SAMPLE  

INTERIM DRY STORAGE OF COMMERCIAL SPENT NUCLEAR FUEL

This Special Topic Report addresses the degradation mechanisms that could potentially affect the performance of spent fuel stored in a dry, inert environment for periods up to ~100 years. The focus of the review is on the spent nuclear fuel rods, and not on the storage system components such as the casks or the canisters and their internal hardware elements.

DOWNLOAD SAMPLE  

FUEL RELIABILITY ASSESSMENT THROUGH TADIOCHEMISTRY AND POOLSIDE EXAMINATIONS

The overall objective of this Special Topic Report (STR) is to provide the knowledge of how the reactor environment (fast neutron flux, temperature, water chemistry, etc.) and the Zr-alloy microstructure, which is a function of material chemistry and manufacturing process, impacts fuel performance during normal operations, transients, design basis accidents and interim dry storage.

DOWNLOAD SAMPLE